Skip to content

Hardware_Specification_UP2

AAEONAEU-SW edited this page Dec 7, 2020 · 3 revisions

Datasheet

SoC

Memory

  • 2GB/4GB/8GB LPDDR4

Graphics

  • Intel® Gen 9 HD with 12 (Celeron) /18 (Pentium)Execution Units, supporting 4K Codec Decode and Encode for HEVC4, H.264, VP8

Video Output

  • 1 Full HDMI 1.4b – 4K (3840x2160) @ 30 hz
  • 1 DisplayPort 1.2 – 4K (4096x2160) @ 60 hz
  • eDP display

Camera Interface

(currently only supported on windows)

  • 1 MIPI-CSI2 (4-lane) --support Chicony 8M pixel camera part number: [CJAG82420005190LH]
  • 1 MIPI-CSI2 (2-lane) --support Chicony 2M pixel camera part number: [CJFGF1820005190LH]

Storage

  • 16GB / 32 GB / 64 GB / 128 GB HS400 eMMC

Network

  • 2x GbE Realtek RTL8111G

USB

  • 3 USB 3.0 host ports (USB3.0 Type A socket)
  • 1 USB 3.0 OTG port (USB3.0 Micro-B socket)**
  • 2 USB 2.0 host ports (10-pin header) (from HUB)
    • Device mode is currently supported through a configuration option from the BIOS menu
    • Additional cable required to provide Type A socket for host mode

SATA

  • Full-size SATA3 port (SATA 6Gb/s)

Expansion Slot

  • 1 mini-PCIe+USB/mSATA slot
    • mini PCI-e slot supports PCIe Gen.2, and 5Gbps bandwidth
    • mSATA mode is currently supported through a configuration option from the BIOS menu
  • 1 M2 2230 slot (M.2 slot supports PCIe Gen.2, and 5Gbps bandwidth)

Digital I/O

The UP Squared has three connectors for GPIO/peripherals:

  • m10 header
  • HAT connector: pin-compatible with Raspberry Pi Pin position
  • exHAT high-density connector: to have extra GPIO/peripheral

M10 header

The M10 header has one UART (max 3Mbaud) and two USB 2 ports available through an adapter cable,

http://up-shop.org/up-peripherals/110-usb-20-pin-header-cable.html

HAT CONNECTOR

Each of the HAT pins has a dual function, a standard GPIO in/out mode, and a function mode. On the board start all the pin are set in function mode by default but that can be changed within the bios menu see 40-pin multi-function I/O header

  • 28 GPIO-capable pins
  • 2 I2C ports:
    • mode supported Standard, Fast, Fast Plus, High Speed)
  • SPI0:
    • max speed 25MHZ
    • 2 Chip enable
    • supported modes 0 and 2
  • SPI1:
    • max speed 25MHZ
    • 3 Chip enable
    • supported modes 0 and 2
  • uart1
    • max baudrate 3Mbaud
    • hardware flow control
  • 3 PWM output
  • 1 i2s port

If you would like to access the ADC function for 40 pin of UP Squared Atom E39xx serious, please go to UP community downloads

  • Click here to access

exHAT connector

  • 38 GPIO-capable pins
  • 2 I2C 1.8v ports
  • DMIC interface

RTC

  • Present

FPGA

(ALTERA) Intel® MAX® 10 FPGAs 10M02 (2K gates)

Board Dimension

  • 85.60 mm × 90.0 mm x 46 mm (with passive heatsink installed)

Power Supply Specifications

Related links

Clone this wiki locally