Warning: POWER OFF the UPCore board BEFORE plugging/unplugging a carrier board.

What you see after you open the box

After you open the box, you will see three parts. One big black bag contains the main carrier board, another black bag contains the connector. The last transparent bag contains screws, nuts, and standoffs needed to put the carrier board together with the UP Board.

Main carrier board and connector

Open the two black bags, you will these two guys, which are the main carrier board and the connector

Backside

Frontside

• Use two nuts to fix the two higher standoffs.
• Two nuts should be on the **backside **of the carrier board while two higher stand-offs should be on the front side
• screws them together

Backside

Frontside

Note: Four stand-offs are two pairs. The length of threads inside stand-offs is different. The pair with shorter threads are used in Step two, while the one with longer threads are used in Step four

• Use two nuts to fix the two shorter standoffs.
• Two nuts should be on the **backside **of the carrier board while two shorter standoffs should be on the front side
• screws them together

Put the connector on top

How does it look on the side

Put the connector on the top of the carrier board

Other two shorter standoffs

How does it look on the side

Note: Four stand-offs are two pairs. The length of threads inside stand-offs is different. The pair with shorter threads are used in Step two, while the one with longer threads are used in Step four

Screw the other two shorter stand-offs which have longer threads inside on the connector board

Put upboard on top of the carrier board

Connect you Up board on top of the connector. Make sure it aligns a straight line with threads of stand-offs

4 screws on Up-board

Longer stand-offs side look

Screw the last four screws with stand-offs tightly.

Finished!