Connect the carrier board as shown in the picture, including the additional cable.

Net Plus with UP Xtreme

You can now power on the system and the 4 Intel i210/i211 Network interfaces will be automatically available by the Operating System.

NOTE:

To open the USB3.0 for Net Plus, you will need to change the following BIOS setting,

1. Press Del to enter CRB BIOS settings with password “upassw0rd”`
2. Main --> CRB Setup --> CRB Chipset -->PCH-IO Configuration --> PCI Express configuration --> change "Docking Port Auto Detection" from Enabled to Disabled, and set "Docking Port 5 Multifunction Selection" to USB.`
3. Press [F4] key to save the configuration and reset. Then the system will show a message "Docking Port configurations Changed, please turn off AC power, then turn On to take effect".`

Here are the settings: