Skip to content
Daniele Cleri edited this page Jun 27, 2023 · 13 revisions

Setup Requirements

To get started with the UP Single Board Computers, you will need the following:

  • PSU: Check Power Requirements below
  • USB flash drive: at least 8GB

And

  • Monitor
  • HDMI cable (or another video cable with a HDMI adapter)
  • USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)

Or, to use the board through serial console:

  • 10-pin connector adapter
  • Serial cable

PSU (Power Requirements)

Please make sure you are using the correct PSU adapter with your board. Certified PSU are available from our shop

Software Setup

Linux

Windows

Clone this wiki locally