Skip to content

UP_Core_carrier_board_(high_speed_I

AAEONAEU-SW edited this page Nov 25, 2020 · 1 revision

Warning: POWER OFF the UPCore board BEFORE plugging/unplugging a carrier board.


UPC-CRST01 Hardware Specifications

Specifications
PCIe Switch 1x 2 channel PCIe switch
Ethernet 1x Realtek RTL8111G-CG
HSIC 1x HSIC to USB to 3 USB ports (1x MiniCard, 2x connector)
Internal I/O ports 1x MiniCard
1x uSIM Card Reader
1x power LED (bottom side)
Edge I/O ports 1x RJ45 Ethernet port
2x USB2.0 x1 connector
SDCard (pluggable at back side)
Operating Temperature 0 ~ 60ºC
Operating humidity 10%∼80%RH non-condensing
Form factor 56.5mm x 66mm
Certificate CE/FCC Class A

Quick tests

Board detection in BIOS

Run your UPCore board with your UP-CRST01 carrier board attached. Including a USB keyboard and HDMI display. Press the Esc key and enter the BIOS settings. There, you will see something like:

 Carrier board Vendor: AAEON
 Carrier board Product: UP-CRST01 rev A0.2_0_0

Board detection in Linux

Open a terminal windows for your Linux distro (https://wiki.up-community.org/Software#Operating_Systems).

Check the dmesg log looking for CRST01 board:

dmesg | grep CRST01

You will see something like that:

[ 0.000000] ACPI: SSDT 0x000000005B880000 000024 (v01 AAEON UPCRST01 00000000 INTL 20160831)

Clone this wiki locally