Difference between revisions of "Up Board Setup"

From UpWiki
Jump to: navigation, search
(FAQs)
(FAQs)
 
Line 63: Line 63:
 
== [[FAQs]] ==
 
== [[FAQs]] ==
 
* [https://wiki.up-community.org/FAQs#Not_Booting_or_Powering_up Not-Booting or Powering-Up]
 
* [https://wiki.up-community.org/FAQs#Not_Booting_or_Powering_up Not-Booting or Powering-Up]
* [Windows FAQs]
+
* [[Windows FAQs]]

Latest revision as of 15:54, 18 March 2020

Basic requirements

Power Requirements

Please make sure you are using the correct PSU adapter with your board. Certified PSU are available from our shop: www.up-shop.org

UP Board (5V only): 5V4A PSU https://up-shop.org/up-peripherals/65-dc-power-adapter-for-up-board-eu-plug.html
UP Core (5V only): 5V4A PSU https://up-shop.org/up-peripherals/65-dc-power-adapter-for-up-board-eu-plug.html
UP Squared (5V only): 5V6A PSU https://up-shop.org/up-peripherals/126-up-squared-power-supply-5v6a.html (power cord sold separately)
UP Core Plus (12V only): 12V5A PSU https://up-shop.org/up-peripherals/230-up-core-plus-power-supply-12v5a.html (power cord sold separately)
UP Xtreme (wide range 13+ to 60V): 19V3.42A PSU https://up-shop.org/up-peripherals/351-up-xtreme-power-supply.html (power cord sold separately)

Other Hardware Requirements

  • USB stick to flash the Operating System Installer

To be able to set up the board, you'll need either:

  • Screen
  • HDMI cable (or another video cable with a HDMI adapter)
  • USB keyboard

or, to use the board through serial console:

  • 10-pin connector adapter
  • Serial cable

Alternative Power sources

  • If your application doesn't require a lot of power, the UP board and UP Squared could also be powered through the 5V HAT pins
  • (Early innovators only) pre-production revisions of the boards should only be powered through the DC jack.

Setup guides

Linux

Deprecated:


Windows

This page will explain how to install Microsoft Windows 10 on any board from the UP Series.

It is assumed that the UP board is connected to a screen via HDMI cable and it has a mouse and keyboard also connected.

  • Visit the download section to get a copy of the Microsoft Windows 10 Drivers package for UP Board (32 or 64bit depending on your installation).
  • Then you can download the media creation tool from the official MS Windows website and follow the instructions provided by Microsoft to create a USB installer for Windows 10 to setup your system.

Videos and Tutorials from our Community:

FAQs