Up Board Setup

From UpWiki
Revision as of 12:28, 28 November 2018 by Upwikiadmin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Basic requirements

To be able to set up the board, you'll need either:

  • Screen
  • HDMI cable (or another video cable with a HDMI adapter)
  • USB keyboard

or, to use the board through serial console:

  • 10-pin connector adapter
  • Serial cable

Alternative Power sources

  • If your application doesn't require a lot of power, the UP board could also be powered through the 5V HAT pins
  • (Early innovators only) pre-production revisions of the board should only be powered through the DC jack.

Setup guides

Linux

Windows

This page will explain how to install Microsoft Windows 10 on an UP board.

It is assumed that the UP board is connected to a screen via HDMI cable and it has a mouse and keyboard also connected.

Videos and Tutorials from our Community:

Yocto

FAQs