Up Board Setup

From UpWiki
Revision as of 09:21, 8 January 2020 by Upwikiadmin (talk | contribs) (Setup guides)
Jump to: navigation, search

Basic requirements

To be able to set up the board, you'll need either:

  • Screen
  • HDMI cable (or another video cable with a HDMI adapter)
  • USB keyboard

or, to use the board through serial console:

  • 10-pin connector adapter
  • Serial cable

Alternative Power sources

  • If your application doesn't require a lot of power, the UP board could also be powered through the 5V HAT pins
  • (Early innovators only) pre-production revisions of the board should only be powered through the DC jack.

Setup guides

Linux

Deprecated:


Windows

This page will explain how to install Microsoft Windows 10 on an UP board.

It is assumed that the UP board is connected to a screen via HDMI cable and it has a mouse and keyboard also connected.

Videos and Tutorials from our Community:

FAQs